Click image to view full size image
Tungsten carbide wire drawing dies
1. Our advantage
1 100% raw material
2 HIP Furnace Sintered
3 High precision grinding
4 Bore size up to 0.1mm
5 Produce finished dies with steel case
6 Fast delivery
7 Professional manufacturer of tungsten carbide products with 20 years experience.
8 Complete Quality Control System and strict inspection.
2. Our Mould size
Type W
Type S11
Type S12
Type S13
Type 22
Type 23
Type S30
Type S40
Type S41
Type S42
Type S60
Type R
3. Grade recommendation
1. Our advantage
1 100% raw material
2 HIP Furnace Sintered
3 High precision grinding
4 Bore size up to 0.1mm
5 Produce finished dies with steel case
6 Fast delivery
7 Professional manufacturer of tungsten carbide products with 20 years experience.
8 Complete Quality Control System and strict inspection.
2. Our Mould size
Type W
Type S11
Type S12
Type S13
Type 22
Type 23
Type S30
Type S40
Type S41
Type S42
Type S60
Type R
3. Grade recommendation
| Grade | Density(g/cm3) |
Hardness(HRA) |
TRS(MPa) |
Applications recommended |
| YG6X | 14.95 | 91.5 | 1800 | For drawing steel and nonferrous wires or bars of less than diameter 6.00mm under not so much stress. |
| YG6 | 14.95 | 90.5 | 1900 | For drawing steel, nonferrous alloy bars of less than diameter 20.00mm under more stress and also for drawing tubes of less than diameter 10.00mm. |
| YG8 | 14.8 | 89.5 | 2200 | For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts. |
| YG10 | 14.5 | 88.5 | 2400 | |
| YG15 | 14.0 | 87.0 | 2800 | For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting. |